Behringer iNUKE NU12000DSP Ultra-Lightweight 12000W Power Amplifier

Description

Behringer iNUKE NU12000DSP Ultra-Lightweight 12000W Power Amplifier

Behringer iNUKE NU12000DSP Ultra-Lightweight 12000W Power Amplifier is equipped with  12000-Watt Power Amplifier with DSP.Power Outputs  2 x 6000 Watts at 2 Ohms, 2 x 3400 Watts at  4

Ohms,  2 x 1700 Watts at 8 Ohms and rack-mountable sets. The conventional design makes it more efficient, it works cooler and no require a massive heat sink and heavy toroid transformers connected with its standard counterparts. Due to its Zero Attack limiters, you get the highest output level, and with incredibly reliable overload protection and SmartSense Loudspeaker impedance compensation, which gives a completely linear frequency response at each speaker load impedance, you can manage the NX6000D full-out for hours-on-end. Behringer advanced high-density Class-D technology, consolidated with an ultra-efficient, switch-mode power supply assures this feather-light powerhouse will encourage your rig effortlessly for countless years to come.

Behringer uses innovative High-Density Class-D amplifier Technology, that gives you immense power and amazing sonic performance in an ultra-portable, easy-to-use, and lightweight package. The Class-D amplification presents all the diversity, allowing dynamic energy efficiency – and rejecting the need for heavy power supplies and huge heat sinks. This marvelous technology executes it feasible to design and makes very powerful products that are significantly lighter in weight than their traditional counterparts while utilizing less energy and preserving the environment.

The front panel indicators and controls give your system important signs at a glance. After pushing the Power key, the Power LED lights show the amp is set for action. Each channel comes with positive-detent Gain controls with Signal LEDs that light while a signal is present, as well as Clip LEDs to indicate when the signal is changed and you want to decrease the input signal. Just as fine as the front, the rear panel is home to the combo XLR and 1⁄4 inch TRS input connectors, offering the iNUKE compatible with essentially any source, unbalanced or balanced. High-quality twist-lock speaker sockets are equipped to assure every bit of output power gets to your loudspeakers. This rear panel is also where you’ll get the switches that allow the NU12000DSP amp to work in your choice of double mono, stereo, or mono bridge modes.

Behringer iNUKE NU12000DSP also features a built-in Crossover switch that arranges the amp to Full-Range mode, where the output is transferred unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

Behringer iNUKE DSP Series amplifiers feature set for action right out of the box. In addition, DSP and 24-bit/96 kHz converters assure dynamic signal integrity with a very broad dynamic range. The DSP functions add a modern delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamics), and dynamics processing with lockable security settings. A handy front-panel LCD lets you set up and make adjustments directly at the amplifier, without the requirement for a PC.

Product Features:

• Offers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg.
• Perfect reliability through revolutionary cool-running High-Density Class-D technology with near-zero thermal buildup.
• Very-efficient switch-mode power supply for noise-free audio, excellent transient response, and low power consumption.
• High-quality DSP and 24-bit/96 kHz converters give ultimate signal integrity and advanced dynamic range.
• DSP section features advanced delay,  EQ (8 parametric, 2 dynamic), crossover (3 filter types, up to 48 dB/octave), dynamics processing, and lockable security settings.
• Features front panel LCD display allows setup and adjustment without PC.
• Zero-Attack limiters give the best output level with reliable overload protection.
• Built-in Subwoofer/Satellite crossover for accurate subwoofer operation.
• Illuminated and Detented gain controls for specific level settings.
• Accurate 4-segment Signal and Limit LEDs to monitor performance
• XLR and 1/4 inch TRS combination input connectors for compatibility with any source.
• High-quality twist-lock speaker connectors for ultimate reliability.
• Comes with Neutrik powerCON 32A twist-lock connector (cable not included).

  ---

Product details:

• Brand: Behringer
• Model: iNUKE NU12000DSP
• Power Output : 2 Ω per channel 2 x 6000 W; 4 Ω per channel 2 x 3400 W; 8 Ω per channel 2 x 1700 W
• Resolution : 24-bit at 96,000 Hz
• Front : Power switch gain controls (channels A and B);
• Rear : Mode switch (stereo/mono); Crossover switch (LF/full-range/HF); Circuit breaker
• Power : Amber backlit illuminated gain controls
• Limiter    Per channel : 0 dB, full scale
• Signal    Per channel : -24, -12, -6 dB
• RMS Voltage Swing 8 Ω : 0.75 V (-0.3 dBu)
• Input Connectors : 2 x combo jacks
• Input Impedance : 10 kΩ unbalanced; 20 kΩ balanced
• Outputs : 2 x locking-style professional speaker connectors
• Circuit Type : Class D
• Distortion : <0.2 %
• Frequency Response : 20 to 20,000 Hz, +0/-2 dB
• Damping Factor : >100 at 8Ω
• Signal-to-noise : >100 dB
• Circuit Protection Cooling: Continuously variable-speed fan back-to-front airflow
• Amplifier protection: thermal and DC protection stable into reactive or mismatched loads
• Load protection: on/off muting, DC-fault power supply shutdown
• Connector Mains: Neutrik powerCON 32 A
•  Manufacturer Warranty: 3 year

• Country of origin: China
• Manufacturer details: Behringer
• Packer details: Behringer
• Importer details: Behringer