Behringer iNUKE NU12000 Ultra-Lightweight 12000W Power Amplifier

Description

Behringer iNUKE NU12000 Ultra-Lightweight 12000W Power Amplifier

Behringer iNUKE NU12000 Ultra-Lightweight 12000W Power Amplifier is equipped with  12,000 Watts (2 x 6,000 Watts @ 2 Ohms; 2 x 3,400 Watts @ 4 Ohms; 2 x 1,700 Watts @ 8 Ohms) into exceptionally lightweight (12 kg) and rack-mountable sets. The conventional design makes it more efficient, it works cooler and no require a massive heat sink and heavy toroid transformers connected with its standard counterparts. Due to its Zero Attack limiters, you get the highest output level, and with incredibly reliable overload protection and SmartSense Loudspeaker impedance compensation, which gives a completely linear frequency response at each speaker load impedance, you can manage the NX6000D full-out for hours-on-end. Behringer advanced high-density Class-D technology, consolidated with an ultra-efficient, switch-mode power supply assures this feather-light powerhouse will encourage your rig effortlessly for countless years to come.

Behringer uses innovative High-Density Class-D amplifier Technology, that gives you immense power and amazing sonic performance in an ultra-portable, easy-to-use, and lightweight package. The Class-D amplification presents all the diversity, allowing dynamic energy efficiency – and rejecting the need for heavy power supplies and huge heat sinks. This marvelous technology executes it feasible to design and makes very powerful products that are significantly lighter in weight than their traditional counterparts while utilizing less energy and preserving the environment.

The front panel indicators and controls give your system important signs at a glance. After pushing the Power key, the Power LED lights show the amp is set for action. Each channel comes with positive-detent Gain controls with Signal LEDs that light while a signal is present, as well as Clip LEDs to indicate when the signal is changed and you want to decrease the input signal. Just as fine as the front, the rear panel is home to the combo XLR and 1⁄4 inch TRS input connectors, offering the iNUKE compatible with essentially any source, unbalanced or balanced. High-quality twist-lock speaker sockets are equipped to assure every bit of output power gets to your loudspeakers. This rear panel is also where you’ll get the switches that allow the NU12000 amp to work in your choice of double mono, stereo, or mono bridge modes.

Behringer iNUKE NU12000 also features a built-in Crossover switch that arranges the amp to Full-Range mode, where the output is transferred unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

Product Features:

• Offers 2 x 6000W at 2Ω, 2 x 3400W at 4 Ω, 2 x 1700W at 8 Ω.
• Equipped with class-D amplifier technology with near-zero thermal buildup.
• Use an efficient switch-mode power supply for improved transient response, noise-free audio, and low power consumption.
• Consolidates zero-attack limiters to guard output level with strong overload protection.
• It comes with a built-in subwoofer crossover for dynamic subwoofer operation.
• Well-defined 4-segment Signal and Limit LEDs to monitor performance.
• High-quality XLR and 1/4 inch TRS input connectors for harmony with a variety of different sources.
• Uses professional twist-lock speaker connectors for reliable connections.

  ---

Product details:

• Brand: Behringer
• Model: iNUKE NU12000
• Power Output:
• 2 Ω per channel, stereo: 2 x 6000 W
• 4 Ω per channel, stereo: 2 x 3400 W
• 8 Ω per channel, stereo: 2 x 1700 W
• Front: Power switch gain controls (channels A and B)
• Rear: Mode switch (stereo/mono), Crossover switch (LF/full-range/HF), Circuit breaker
• Power: Amber backlit illuminated gain controls
• Limiter: Per channel: 0 dB, full scale
• Signal: Per channel: -24, -12, -6 dB
• RMS Voltage Swing: 8 Ω: 0.75 V (-0.3 dBu)
• Input Connectors: 2 x combo jacks
• Input Impedance: 10 kΩ unbalanced, 20 kΩ balanced
• Outputs: 2 x locking-style professional speaker connectors
• Circuit Type: Class-D
• Distortion
• Frequency Response: 20 to 20,000 Hz, +0/-2 dB
• Damping Factor: >100 at 8Ω
• Signal-to-noise: >100 dB
• Power Consumption: 2 Ω at 1/8 rated power: 1300 W, 4 Ω at 1/8 rated power: 760 W
• Connector: Mains: Neutrik powerCON 32 A
• Dimensions (HxWxD): 3.7 x 19 x 17.2 inch (94 x 482 x 436 mm)
• Weight: 12.0 kg
•   Manufacturer Warranty: 3 year

• Country of origin: China
• Manufacturer details: Behringer
• Packer details: Behringer
• Importer details: Behringer