Epiphone Les Paul Ultra III ENU3VSNH1 Vintage Sunburst Electric Guitar

Description

Epiphone Les Paul Ultra III ENU3VSNH1 Vintage Sunburst Electric Guitar

Epiphone ENU3VSNH1 consists of two pickup systems that are ProBucker Humbucker pickups and Shadow's NanoMag system. Epiphone’s ProBucker humbuckers are constructed with sand-cast Alnico II magnets, high quality 4 conductors lead wire vacuum wax potted to eliminate microphonics, and 18% Nickel Silver unit bases and covers. The Benefit of using Nickel Silver is that it decreases the phenomenon of eddy currents due to low conductivity and gives a more transparent and crisp output. The second system features Shadow's NanoMag pickup, which is installed at the end of the fingerboard. The NanoMag low-impedance pickup features three Samarium Cobalt magnets, an air coil, and active electronics that amplify all the body vibrations and string harmonics. Epiphone Les Paul Ultra III is powered by Pro-Bucker humbuckers and the Shadow NanoMag pickup system that captures the body acoustics and string harmonics. It has a stereo, mono, USB outputs, a chromatic tuner and individual gain/tone controls for each pickup system. Epiphone Les Paul Ultra-III has a beautiful AAA Flame Maple Veneer Top and a lighter, chambered Mahogany body with a belly scarf making it more comfortable for practicing or recording. The Mahogany neck has a SlimTaper D profile with a Pau Ferro fingerboard with mother-of-pearl Trapezoid inlays, a 24.75-inch scale length, 22 medium jumbo frets, and a 12-inch radius. Both the body and the fretboard have cream binding.

Epiphone ENU3VSNH1 features three different outputs. By using the standard 1/4 inch MONO output, both the ProBucker humbuckers and NanoMag pickups are mixed into one signal. When you plug another 1/4 inch cable into the STEREO output, the Humbuckers are routed through one cable and the NanoMag the other. By using the STEREO output, you can send the humbuckers to your guitar amplifier and the NanoMag to a PA or acoustic guitar amplifier. You can use the NanoMag Volume & Push/Push switching to switch between the two outputs. The third output is for a USB cable, so you can plug directly into your computer and use guitar applications. The Epiphone Ultra-III is packed with a LockTone Tune-o-Matic bridge and LockTone stopbar tailpiece for incredible sustain, Grover machine heads with an 18:1 turning ratio, and  1/4 inch non-rotating output jack for both the mono and stereo outputs. Epiphone ENU3VSNH1 humbuckers have Volume control as well as a Master Tone Control for each pickup. You can just push it in and quickly toggle between NanoMag or both pickup systems with no delay and pop sound. There are two additional LED's given on the pickup-mounting ring which provides a visual indicator as to which pickup system is active (Red=NanoMag; Blue-Magnetic or Red/Blue=Both). You can also pre-set the overall gain and tone of the NanoMag pickup on the back, by using the 9-volt battery compartment. A full-function chromatic tuner is built into the bridge pickup mounting ring. You may push the ON/OFF switch and the sound immediately gets muted when the tuner is activated. The Eleven color-coded LED's recognizes the note as well as whether it's sharp, flat, or in-tune.

Product Features :

• USB, mono, stereo outputs
• Pro-Bucker and Shadow NanoMag Pickup Systems
• AAA Flame Maple Veneer Top with Chambered Mahogany Body

Product Details:

• Brand: Epiphone
• Model Number: ENU3VSNH1
• Colour: Vintage Sunburst
• Hardware: Nickel
• Truss Rod: Adjustable
• Scale Length: 24.75 inch
• Nut Width: 1-11/16 inch
• Frets: 22, medium-jumbo
• Neck Material: Mahogany
• Fingerboard Radius: 12 inch
• String DAddario: (.010-.046)
• Neck Shape: SlimTaper, D profile
• Machine Heads: Grover 18:1 Tuner
• Neck Pickup: Epiphone ProBucker-2
• Bridge Pickup: Epiphone ProBucker-3
• Top Material: AAA Flame Maple veneer
• Neck Joint: Glued-In, Mortise, and Tenon
• Bridge: LockTone Tune-o-Matic/StopBar
• Body Material: Mahogany, Strategically Chambered, back Belly-scarf
• Fingerboard Material: Pau Ferro with mother-of-pearl Trapezoid inlays
• Fingerboard Pickup: Shadow NanoMag Humbucking Low-Impedance Pickup
• Front Controls:
  • Master Tone
  • A/B LED Indicators
  • Neck Pickup Volume
  • 3-way Pickup Selector
  • Bridge Pickup Volume
  • NanoMag Pickup Volume with push-push A/B switch
• Back Controls:
  • Low Pitch
  • High Pitch
  • LED Indicator
  • On/Off Switch
  • NanoMag Gain
  • Chromatic Tuner
  • NanoMag Bass EQ
  • NanoMag Treble EQ
  • In-Tune LED Indicators
  • A-G LED Note Indicators
• Outputs:
  • 1/4 Stereo
  • 1/4 inch Mono (both signals blended)
  • USB (Computer supplies power to Ultra-III when connected)
• Power: 9 Volt battery (except when connected to computer USB)
• Binding:
  • Fingerboard: 1 ply (cream)
  • Body: 1 ply (cream)
• Item Weight: 4 Kg
• Dimensions: 114 x 43 x 15 cm

• Country of origin: China
• Manufacturer details: Epiphone
• Packer details: Epiphone
• Importer details: Epiphone